hi please go through the below:-
--------------------------------------
MSW01(config)#do sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi0/3, Gi0/9, Gi0/10, Gi0/11, Gi0/12, Gi0/13, Gi0/14, Gi0/15, Gi0/16, Gi0/17, Gi0/18, Gi0/19, Gi0/20, Gi0/23, Gi0/24
2 VLAN0002 active
10 management active Gi0/1
20 vMotion active Gi0/2
30 Storage active Gi0/21, Gi0/22
40 FT active Gi0/4
50 vShield active Gi0/5
60 Backup active Gi0/6
70 Infra active Gi0/7
80 vCloud active Gi0/8
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
10 enet 100010 1500 - - - - - 0 0
20 enet 100020 1500 - - - - - 0 0
30 enet 100030 1500 - - - - - 0 0
40 enet 100040 1500 - - - - - 0 0
50 enet 100050 1500 - - - - - 0 0
60 enet 100060 1500 - - - - - 0 0
70 enet 100070 1500 - - - - - 0 0
80 enet 100080 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
this is the vlan i have created on the switch , i have added the corresponding vlan id on the switch port group on the dvswitch, and also trunking has been enabled on the dvswitch.
i am using explict for the teaming,
------------------------------------------