Hi all,
I've just experienced a similar issue, i.e., "BlockLevelVolumeCloneMgr::CloneVolume: Detected a write error during the cloning of volume \WindowsBitmapDriverVolumeId=[59-4E-26-28-00-7E-00-00-00-00-00-00]. Error: 37409 (type: 1, code: 2338)".
I'm running Converter Standalone v5.1.0 Build 1087880 and when I attempted to P2V a Windows 2003 server with a C: and D: drive, the C: drive completed successfully and then it failed as it started the D: drive. The speed of the P2V was *EXTREMELY SLOW*, I'm talking 566KB/s!!! After reading through all these posts, I disabled the SSL encryption as per Re: Increasing the cloning performance and that fixed my problem. The physical server I'm converting is a very old Proliant model and I'm thinking that its CPU just couldn't handle the load from the encryption.
Thanks,
George.
