Is there any other way of doing this?
Re: Reset Configurationadmin account password in vRA 7
Re: VMWare View authenticating against wrong DC
Yes, the subnets are assigned to the correct site in London. Not to the DC in Bermuda
Re: How do you keep several restore points?
Looks like you are not using correct retention policy for your backup.
You need to choose for "X" day(s) option, where X is number of days. Please refer the attached screenshot image. The number of days option showing retention of backup up to 60 days(red circled). Please choose this option to keep each backup for minimum 10(or X) days.
Re: VMWare View authenticating against wrong DC
Just to add, the DCs have published their correct DNS SRV records and the DNS SRV record for the DC in Bermuda has also been appropriately weighted with the highest number to be the least likely used DC
Re: OS X 10.11 guest on VMW 12.1.1 Multiple Monitor Workaround
Hello,
Unfortunately Apple does not allow you to run a virtual mac OS X on non-Apple branded hardware.
Since this violates Apple's EULA (and as such the VMware Community Terms of Use), any issues you have with trying to run OS X using VMware Workstation cannot be discussed at this forum.
You'll need to have apple hardware and use a product like VMware Fusion or VMware ESXi in order to legally run a virtual copy of OS X.
Hope you understand,
--
Wil
Re: vCenter orphaned sorunu
Merhabalar bu sorunun sebebi birden fazla olmakla birlikte genellikle HA problemlerinde yada vcenter dışında esxi hostları üzerinden register unregister işlemleriyle vcenter databasein güncellenmemesi ile karşımıza gelir.
Benim önerim öncelikle esxi management agentlar ile vcenter restart edin. Düzelmiyorsa veya sanal makina sayınız az ise sanal makinalarını envanterden kaldırıp ( remove from inventory ) diyerek daha sonra yeniden eklemenizdir.
Dikkat: Bu işlemi yapmadan önce sanal makinaların hangi datastore'da bulunduğunu lütfen note edin, bu işin kolay yönü rvtools ile rapor çekmektir.
Selamlarımla.
Re: Nvidia Quadro K6000 - G Sync Board
Hi Ray
Sorry for the delay
Yes I was trying to get a POC on vDGA...All went good.....for Nvidia Quadro Sync and mosaic things I did some codings on my own and can access it via api
Currently in the POC for vGPU...........
Thanks
kazim
Is there a possibility to achieve stable 60fps on the client side with 2x 1920x1080?
Infrastructure
VMware vCenter
Server: Supermicro 4028 with E5 2697 Proc
VMware Horizon View 7 ( Connection Server)
Tesla M60 Configured in graphics mode
Nvidia License Server with Trial License
Cisco 3560 Gigabit Switch
VM Configuration:
4vCPU
16GB Ram
SSD based storage
End Client: Fat Client Windows 7 Machine 2 Screens 1920x1080 output
Protocol in use: PCoIP with following tweaks performed on client (tested with GPO based as well as client based tweaks)
(HKLM\SOFTWARE\Policies\Teradici\PCoIP\pcoip_admin), :
Tested with different frame rates / min and max image quality etc
\pcoip_admin
pcoip.device_bandwidth_floor: 900000
pcoip.enable_build_to_lossless: 1
pcoip.enable_server_clipboard: 0
pcoip.enable_vchan: 1
pcoip.maximum_initial_image_quality: 100
pcoip.minimum_image_quality: 100
\pcoip_admin_defaults
pcoip.device_bandwidth_floor: 1000000
pcoip.enable_build_to_lossless: 1
pcoip.maximum_frame_rate: 60
pcoip.maximum_initial_image_quality: 100
pcoip.minimum_image_quality: 100
pcoip.transport_session_priority: 1
pcoip.use_client_img_settings: 1
Tests Performed
1 Virtual Machine with Grid vGPU Profile M60-8Q – 8GB
Screen Output: 2 x 1920x1080
Issue No. 1: Nvidia vGPU
vGPU is always rendering more than 60fps. Switched Nvidia FRL(Frame Rate Limiter) on and off to check with following results:
FRL Enabled: Rendering is always above 65fps reaching till 70 fps
FRL Disabled: Rendering is always above 70fps reaching till 80 fps
Isssue No. 2: PCoIP
Unable to get 60fps on client side
We require 1920x1080 @ 60hz = 124,416,000 pixels per screen
For 2 screens the total will be 248,832,000 pixels
Perfmon shows PcoIP not exceeding 51Mpps.
As per my understanding, the limit is on the transmission protocol i.e maximum Mpps via soft client
So.....My question is: Is there a possibility to achieve stable 60fps on the client side with 2x 1920x1080?
VMware Workstation 11 supports OpenGL 3.3+?
I just fresh installed Windows 7 on a virtual machine, but cannot create a Window using GLFW. Does VMware workstation 11 support OpenGL 3.3 +? My video card supports up to 4, and currently on a Windows PC.
Thanks!
Re: Windows 10 Anniversary
You're correct, I did a repair, not a full uninstall/reinstall.
Having done so shared folders appears to be working properly. Thank you!
Windows show 2-3% CPU in task manager, while top shows the vmware-vmx process in OSX at 25- 30%.
I've allocated 2 vCPUs to the VM, and the laptop has a dual proc 2.9 Ghz i5 (I5-5287U).
Guest is at hardware version 12, virtualisation engine is automatic, no advanced options are enabled in the processor tab.
Re: mouse lock problen on host system
I got the same issue. I can move and click mouse/keyboard on the VM, but the clicks will be ignored by the host, mouse still moves. keyboard is fine.
when i shut down the guest everything went back fine
Host: Windows 8.1
Guest: Windows 7 Ultimate
Dual Monitor
Re: VMware Workstation 11 supports OpenGL 3.3+?
Hi,
No, unfortunately Workstation 11 does not support OpenGL 3.3
See also:
VMware Workstation: Features support and comparison between versions
You need Workstation 12 in order to have OpenGL 3.3 support.
Note that in order to be able to have your guest OS have OpenGL 3.3 support there are a number of requirements on host OS, host graphics card and that your guest OS has to be using the latest virtual hardware.
Hope this helps,
--
Wil
Re: Virtual machine files when missing.
Please SSH to any host that has access to the VMs folder.
Then CD to the VM's folder
run ls-alh and post the results to see what files from the VM are there.
If they are all there, you can browse the datastore in the vSphere client go to the VM folder and right click the vmx file and import into the inventory
Load Balancer and HA problem
Hi everyone,
i configured HA for my nsx EDGE because i want to have 2 edge activ and passv for my load balancing
but whwn i stoppend the seconde first edge VM for calculate the time of the failed connection.
the connection failed and the second VM does'nt work
Do i need configure any thing else ?
Thamk you for yours helps
Re: Question: Wrong Number of Cores shows up in vSphere Client
What vendor and model is the server?
vSphere Essentials Plus Kit and custom ESXi images
Hi,
Are ESXi hypervisors from vSphere Essentials Plus Kit the same ones used in vSphere Standard/Enterprise editions? Can i expect to use Fujitsu Custom Image for ESXi 6.0U2 hypervisor and use them with vCenter Server Essentials?Or are these Fujitsu Custom Image for ESXi used only with standard edition vSpehere editions?
We just ordered 3 Fujitsu Primergy servers with 3x2 CPUs and vSphere Essentials Plus Kit. I really hope i will be able to use Fujitsu ServerView Suite plugins for vSphere web client to bi able to monitor hardware of three new hosts. To be able to do that i plan to use Fujitsu custom ESXi images but can't confirm that they are compatible with vSphereServer Essentials (kit).
Can anyone confirm that?
DAS vs Shared SAS in IBM v3700
Hi,
Can someone please clarify the difference between DAS as in Direct Attached Storage and SAS as in Serial Attached SCSI it the context of host attachment?
We have a IBM® Storwize® V3700 that offers Serial-attached SCSI (SAS) host connections.
Are those shared storage options? Can i attach 3 hosts via Serial-attached SCSI (SAS) host connections and utilize VMware HA and vMotion technologies?
Or are those Serial-attached SCSI (SAS) host connections really Direct Attached Storage options and are NOT shared storage options in vmware world?
Can please someone explain? Can someone please confirm that Serial-attached SCSI (SAS) host connections on IBM v3700 are shared storage options that can be used for vmware HA and vMotion?
Thanks,
Re: vSphere Essentials Plus Kit and custom ESXi images
Hi
yes of course... esxi image is the same for every license edition... In this way you could simply switch from one edition to another without reinstall hypervisor. In the same way all custom images bring the similar way to switch between every license, this because the starting image is the same from every customized images and consequently has the same behavior.
The only thing to pay attention is the vCenter edition:
- if you are using essential kit license you must use vCenter license for essential
- if you are using acceleration or std, ent or ent+ license you must use vCenter std or foundation (max 3 host)
Hope this could useful
Regards
Lino
Re: DAS vs Shared SAS in IBM v3700
The IBM Storwize V3700 support host attachment using iSCSI, FC and SAS. Note that the term "direct attach" in this case is just about the fact you're noting using a switch between your host and storage, this mean that you're connecting your SAS HBA directly on SAS port of your V3700.
And this is a valid and supported configuration, you can see the HCL here: VMware Compatibility Guide - Storage/SAN Search
The following image shows hot to connect 3 hosts to your V3700:
Re: vSphere Essentials Plus Kit and custom ESXi images
Like already stated above, there is no different image for particular edition... no matter if you download the VMware image or the OEM customized image, the unique difference will be some additional drivers present on OEM customized image, but talking about licensing, the same license can be used.